Founded in 2014, after 8 years of collaboration between CEA and Caltech, APIX is focused on the development of highly miniaturized multigas analyzers systems based on integration on silicon of traditional analytical chains: sampling, injection of gases, separation of complex gas mixtures to enhance specificity and then detection, identification and quantification of each mixture compound.
Addressable Analog Device
Analog Addressable Device Control Card
Analog Addressable Device Control card for addressable devices that require APOLLO DISCOVERY and XP95 protocols.With these protocols a wide range of fire detectors, push buttons, optic-acoustic signaling and input/command modules are available.
Analog Addressable Device Control card for addressable devices that require APOLLO DISCOVERY and XP95 protocols. With these protocols a wide range of fire detectors, push buttons, optic-acoustic signalling and input/command modules are available. Through two connection and feeder cables, the card communicates with all devices connected on the loop, periodically polling them or receiving calls (interrupt) from the devices that have detected a status variation. Alarming occurs after the information has been processed, through specific algorithms for the devices; e.g. smoke detectors can provide dynamic alarm thresholds that adjust themselves to compensate for optic sensing element contamination
Features & Benefits:
• Non redundant (note 1)
• Can be hot-swapped (note 2)
• Loop connection (farthest point at 1500 meters)
• Detector sensitivity selectable during the configuration of the panel
• Sensors and wireless interface units XPander
• Periodical functionality self-testing of card and all connected devices
• SMD technology multilayer circuit
• Front plug-in on 19'' rack, with locking screws
For more information please check the belo link:
https://buildings.honeywell.com/us/en/products/by-category/fire-life-safety/i-o-modules/control-modules/analog-addressable-device-control-card
F7002 Analog Addressable Device Control Card
Honeywell F7002 Analog Addressable Device Control Card is for devices that are addressable through the HOCHIKI ESP protocol
Honeywell F7002 Analog Addressable Device Control Card is for devices that are addressable through the HOCHIKI ESP protocol. Smoke, temperature and combined fire detectors, as well as pushbuttons and control modules, with monitored and non-monitored lines, are available with the ESP protocol. This type of card is used only for firefighting system control. It can be hot swapped. Its detector sensitivity can be set as HIGH/MEDIUM/LOW. It has periodical functionality of self-testing of card and all connected devices. Its Communication can be managed by FPGA.
Features & Benefits:
• Non-redundant
• Can be hot-swapped
• Up to 127 addresses, 3 channels each
• Loop connection (farthest point at 1500 m)
• Detector sensitivity can be set as HIGH/MEDIUM/LOW
For more information please check the belo link: